Shop Husqvarna 141 & 142 OEM and Aftermarket Parts

Genuine Husqvarna Carburetor W-29
Part #: 530 07 19-87
Fits 137 (EXPORT), 137 (NORTH AMERICA), 137 E, 137, 142 (EXPORT), 142 (NORTH AMERICA), 142 E, 142

OEM Husqvarna, Poulan fuel filter/pick up body
Fits: smaller chainsaws, trimmers, cut off saws
Part: 530 09 56-46
This will fit a fuel line with an inner diameter of 3mm to 3.5mm
20 pack

NGK brand spark plug BPMR7A - Shop Pack 25 (1195)
Fits: many models of chainsaw and cut off saws.
Replaces: BOSCH WSR6F, CHAMPION CJ7Y

(3)

This 16" guide bar and chain combination features a 3/8" low profile chain that is ideal for homeowners and occasional users who want a low-vibration, low-kickback saw chain.

(1)

Genuine Husqvarna Carburetor
Part #: 545013503
Fits 142, 41, 136, 141

(8)

Genuine Husqvarna Chain Brake Asm.
Part #: 530 05 48-02
Fits 136 LE, 136, 137 (EXPORT), 137 (NORTH AMERICA), 137 E, 137, 141 LE, 141

Quality aftermarket cylinder kit. 40mm bore.
Fits: Husqvarna 136, 137, 141, 142 chainsaw.
Includes: cylinder, piston, rings, wrist pin, cir clips
Comes complete with bearing, spark plug, air filter

(3)

Genuine Husqvarna Muffler Kit
Part #: 530 06 94-15
Fits 137, 142, 141, 136, 142 (EXPORT), 137 (EXPORT)

(2)

Quality fuel filter/pick up body
Fits: Husqvarna chainsaws and cut off saws
Replaces OEM part: 503 44 32-01
This will fit a fuel line with an inner diameter of 3.5mm to 4mm
20 pack

(6)

NGK brand spark plug BPMR7A
Fits: many models of chainsaw and cut off saws.
Replaces: WSR6F, CJ7Y

(4)

Raisman brand high quality chainsaw guide bar and chain combo.
Length: 16"

(2)

Genuine Husqvarna Chainsaw Tune-Up Kit
Part #: 599 33 30-01
Fits 136 LE, 136, 137 (EXPORT), 137 (NORTH AMERICA), 137 E, 137, 141 LE, 141

(2)

Genuine Husqvarna Flywheel
Part #: 575 63 55-02
Fits 120 MARK II, 136 LE, 136, 141 LE, 141, 230, 235 E, 235

(1)

Quality aftermarket fuel filter
For use on many smaller trimmer, brushcutters, blowers, etc.
Replaces OEM part: Zama ZF-1
This will fit a fuel line with an inner diameter of 3mm to 3.5mm
20 pack

(1)

Quality aftermarket sprocket cover with brake and chain adjuster Complete assembly (plastic cover)
Fits: Husqvarna 136, 137, 141, 142 chainsaws
Replaces OEM part: 530 05 48-02

(14)

Quality aftermarket cylinder kit. 40mm bore.
Fits: Husqvarna 136, 137, 141, 142 chainsaw.
Includes: cylinder, piston, rings, wrist pin, cir clips

(10)

Genuine Husqvarna 136/141 Maintenance Kit
Part #: 531 30 02-35
Fits 136, 141

Quality aftermarket carburetor
Fits: Husqvarna 136, 137, 141, 142 chainsaws
Replaces OEM part: 530 07 19-87

(6)

10-Pack Torch brand spark plug

Quality aftermarket crankshaft
Fits: Husqvarna 136, 137, 141, 142 chainsaws
Replaces OEM part: 530 02 97-94 and/or 503 92 08-01

(1)

Quality aftermarket ignition coil
Fits: Husqvarna 36, 41, 136, 137, 141, 142 chainsaws
Replaces OEM part: 530 03 91-43

(13)

Quality aftermarket starter recoil assembly.
Fits: Husqvarna 137, 142 chainsaw
Replaces OEM part: 530 07 19-68

(1)

Genuine Husqvarna U-Spanner
Part #: 502 51 00-02
Fits 136, 141, 36, 41

Eliminates, Prevents Ethanol Fuel Problems
Ethanol, E10 fuels increase the amounts of water and sludge in your fuel tank. Star Tron breaks down this excess water and sludge to sub-micron size allowing it to be safely burned away during normal engine operation. Therefore Star Tron prevents phase separation and fuel gelling, eliminating ethanol fuel problems.

8 oz. Small Engine Star Tron formula treats 48 gallons of fuel

(7)

Quality aftermarket sprocket rim, drum, bearing
7 tooth for a .325" pitch chain.
Fits: Husqvarna 36, 37, 41, 42, 136, 137, 141, 142, Jonsered 2035, 2036, 2040, 2041
Replaces OEM part: 530 06 93-16
*Please note: Some saws use 3/8" sprocket. This only work with .325" bar and chain. Please verify before ordering.

(2)

Quality aftermarket tune up kit
Fits: Husqvarna 136, 137, 141, 142 chainsaws
Includes: air filter, fuel filter, spark plug, Lucas 2.6 oz oil

(5)

Genuine Husqvarna Starter Recoil Spring
Part #: 501 76 31-01
Fits 136, 141, 240 EPA, 240 F, 240 R EPA, 240 R, 240, 245 EPA

(2)

Genuine Husqvarna Flywheel Knocker-Fine Thread
Part #: 502 51 94-01
Fits 136, 141, 36, 41

Quality aftermarket sprocket rim, drum, bearing
7 tooth for a 3/8" pitch chain.
Fits: Husqvarna 36, 37, 41, 42, 136, 137, 141, 142
Please note: Some saws use .325" sprocket. This only work with 3/8" bar and chain. Please verify before ordering.

(4)

Quality aftermarket replacement muffler
Fits: Husqvarna 136, 137, 141, 142 chainsaw
Includes bolts.
Replaces OEM part: 503 06 94-15

(13)